Bosch dishwasher E14 error code
Flow-meter filling fault (water fill not being counted). E14 on a Bosch dishwasher is listed in BSH service data as a filling fault: the control receives no pulses from the flow sensor while the heat-pump circuit already detects water in the tub. The dishwasher switches from pulse-counted filling to timed filling, so many cycles still finish but fill by time instead of by volume. The remedy Bosch gives is to check the wire harness and plugs and to test the flow sensor, a reed switch on the water inlet system.
WHAT THE CODE MEANS
Flow-meter filling fault (water fill not being counted)
E14 on a Bosch dishwasher is listed in BSH service data as a filling fault: the control receives no pulses from the flow sensor while the heat-pump circuit already detects water in the tub. The dishwasher switches from pulse-counted filling to timed filling, so many cycles still finish but fill by time instead of by volume. The remedy Bosch gives is to check the wire harness and plugs and to test the flow sensor, a reed switch on the water inlet system.
SAFE CHECKS — IN ORDER
How to diagnose Bosch E14 yourself
Walk these checks in order before scheduling service. They isolate the most common causes safely without requiring tools or part replacements.
- 1Read the display first. On a Bosch dishwasher the code shows as E:14 with the far-right indicator LED lit. On a Bosch wall oven or range the same two digits mean a loose door-latch switch, which is a different fault with different checks.
- 2Power-cycle the dishwasher: switch it off at the breaker or unplug it for 60 seconds, then start a short programme and note whether E:14 comes back and whether it appears during the fill.
- 3Check whether the cycle still completes. BSH files E:14 on many models as a switch to timed filling with no effect on the wash, and on other models as a programme that stops and drains. A dishwasher that still washes but shows E:14 is running on timed fill.
- 4Open the water supply valve under the sink fully and check that the inlet hose is not kinked or pinched. The flow meter can only count water that arrives, and a partly closed valve is the one supply-side check you can do yourself.
- 5Do not remove the base or side panels to reach the flow sensor. The reed switch and its harness sit beside the inlet valve and the mains wiring, and the Bosch check is a continuity test on the harness followed by a test of the sensor itself.
- 6If E:15 shows as well, deal with E:15 first. That code means the safety switch in the base pan has found water, and it takes priority over a fill-counting fault.
REPAIR COST
How much does Bosch dishwasher E14 repair cost?
The diagnostic visit costs $95, and that fee goes toward your repair. Most Bosch dishwasher repairs in South Florida run between $150 and $400 with parts included. You get a written flat-rate quote before any work starts, so the price cannot change mid-job.
| Service | Typical price |
|---|---|
| Diagnostic visit (applied toward the repair) | $95 |
| Dishwasher repair — parts + labor | $150 and $400 |
| Return visit under the 90-day warranty | $0 |
A code alone does not establish whether a repair or replacement part is needed. Compare the model-specific diagnosis and written quote before deciding. Full pricing lives on our dishwasher repair page.
SPEED
How fast can a technician fix the E14 code?
Same-day in most of Miami-Dade, Broward, and Palm Beach. Call (888) 822-7754 and mention the E14 code and exact model so the technician can prepare for diagnosis. We answer 24/7, including weekends and holidays.
RELATED CODES
Other Bosch dishwasher codes
FAQ
Frequently asked questions
What does the E14 error code mean on a Bosch dishwasher?
▾
E14 on a Bosch dishwasher is listed in BSH service data as a filling fault: the control receives no pulses from the flow sensor while the heat-pump circuit already detects water in the tub. The dishwasher switches from pulse-counted filling to timed filling, so many cycles still finish but fill by time instead of by volume. The remedy Bosch gives is to check the wire harness and plugs and to test the flow sensor, a reed switch on the water inlet system.
Can I clear the E14 code myself?
▾
In many cases yes — start with the safe checks listed above before resetting the appliance. Call for service if E:14 returns after a power cycle, if the dishwasher no longer fills, or if it stops and drains part-way through a cycle. The repair is a harness check plus a flow-sensor test, and on US models a faulty flow meter means replacing the water inlet system, so it is a service visit.
How much does it cost to fix a Bosch dishwasher showing E14?
▾
Most Bosch dishwasher repairs in South Florida run between $150 and $400 including parts. The exact cost depends on which component is faulty. Express Xpert provides a written flat-rate quote before any work starts.
Can I get same-day Bosch dishwasher repair for the E14 code?
▾
Yes. Express Xpert runs same-day Bosch dishwasher repair across Miami-Dade, Broward, and Palm Beach counties, 24/7. Call (888) 822-7754 and tell us the E14 code — the technician arrives with the parts that code usually needs. Every repair is backed by a 90-day warranty.
DEEP DIVE
Want a longer breakdown of this code?
We have a longer article on this exact code with a full repair walkthrough, common parts, and South Florida cost estimates.
Read the full guideSAME-DAY REPAIR
Still seeing E14 after the safe checks?
If the manufacturer's safe checks do not resolve the message, consult the model manual or arrange a diagnosis before replacing parts. Express Xpert services Miami-Dade, Broward, and Palm Beach with same-day dishwasher repair.