Bosch wall oven E010D error code
Control module lost the mains-frequency signal. E010D on a Bosch HBE5452UC wall oven means the control module (Bosch calls it the CPM) no longer detects the mains-frequency signal it uses for timing. Bosch service data lists this as an internal error in the control module, and the repair Bosch names is replacing that module. The same code appears on the Bosch PRD606WEG professional range. This is an electronics fault, not a heating-element or door-lock problem.
WHAT THE CODE MEANS
Control module lost the mains-frequency signal
E010D on a Bosch HBE5452UC wall oven means the control module (Bosch calls it the CPM) no longer detects the mains-frequency signal it uses for timing. Bosch service data lists this as an internal error in the control module, and the repair Bosch names is replacing that module. The same code appears on the Bosch PRD606WEG professional range. This is an electronics fault, not a heating-element or door-lock problem.
SAFE CHECKS — IN ORDER
How to diagnose Bosch E010D yourself
Walk these checks in order before scheduling service. They isolate the most common causes safely without requiring tools or part replacements.
- 1Power-cycle at the breaker: a built-in wall oven is hardwired, so switch its circuit breaker off, wait 60 seconds, restore power, and see whether E010D comes back.
- 2Think back to what happened just before the code: a power outage, a flicker, or a surge. The neighbouring code E010C on this model is logged when mains voltage is interrupted, so a supply disturbance is a real trigger for this family of faults.
- 3Check the breaker itself: make sure it is fully on, not resting between positions, and that the oven is not sharing a circuit that trips or browns out when another appliance starts.
- 4Note whether the display comes on at all, whether the clock keeps time, and whether the oven heats before the code appears. Write that down for the technician.
- 5Do not open the control housing or reseat connectors yourself. The control module sits beside mains wiring, and the module is the part Bosch names for replacement, not a connection you can fix.
REPAIR COST
How much does Bosch wall oven E010D repair cost?
The diagnostic visit costs $95, and that fee goes toward your repair. Most Bosch wall oven repairs in South Florida run between $180 and $450 with parts included. You get a written flat-rate quote before any work starts, so the price cannot change mid-job.
| Service | Typical price |
|---|---|
| Diagnostic visit (applied toward the repair) | $95 |
| Wall Oven repair — parts + labor | $180 and $450 |
| Return visit under the 90-day warranty | $0 |
A code alone does not establish whether a repair or replacement part is needed. Compare the model-specific diagnosis and written quote before deciding. Full pricing lives on our oven repair page.
SPEED
How fast can a technician fix the E010D code?
Same-day in most of Miami-Dade, Broward, and Palm Beach. Call (888) 822-7754 and mention the E010D code and exact model so the technician can prepare for diagnosis. We answer 24/7, including weekends and holidays.
RELATED CODES
Other Bosch wall oven codes
FAQ
Frequently asked questions
What does the E010D error code mean on a Bosch wall oven?
▾
E010D on a Bosch HBE5452UC wall oven means the control module (Bosch calls it the CPM) no longer detects the mains-frequency signal it uses for timing. Bosch service data lists this as an internal error in the control module, and the repair Bosch names is replacing that module. The same code appears on the Bosch PRD606WEG professional range. This is an electronics fault, not a heating-element or door-lock problem.
Can I clear the E010D code myself?
▾
In many cases yes — start with the safe checks listed above before resetting the appliance. Call for service if E010D comes back after a breaker reset with a stable power supply, if the display stays dark or the oven will not heat, or if the code appeared together with a burning smell or a tripped breaker. A persistent E010D is a control-module replacement, which is a service visit.
How much does it cost to fix a Bosch wall oven showing E010D?
▾
Most Bosch wall oven repairs in South Florida run between $180 and $450 including parts. The exact cost depends on which component is faulty. Express Xpert provides a written flat-rate quote before any work starts.
Can I get same-day Bosch wall oven repair for the E010D code?
▾
Yes. Express Xpert runs same-day Bosch wall oven repair across Miami-Dade, Broward, and Palm Beach counties, 24/7. Call (888) 822-7754 and tell us the E010D code — the technician arrives with the parts that code usually needs. Every repair is backed by a 90-day warranty.
SAME-DAY REPAIR
Still seeing E010D after the safe checks?
If the manufacturer's safe checks do not resolve the message, consult the model manual or arrange a diagnosis before replacing parts. Express Xpert services Miami-Dade, Broward, and Palm Beach with same-day wall oven repair.