SAMSUNG / TOP-LOAD WASHER/ERROR CODE/ 5 MIN READ
Samsung top-load washer 1C / 1E error code
Water level or pressure sensor fault. The washer is not receiving a reliable water-level signal from the pressure sensor circuit.
WHAT THE CODE MEANS
Water level or pressure sensor fault
The washer is not receiving a reliable water-level signal from the pressure sensor circuit.
SAFE CHECKS — IN ORDER
How to diagnose Samsung 1C / 1E yourself
Walk these checks in order before scheduling service. They isolate the most common causes safely without requiring tools or part replacements.
- 1Confirm the pressure sensor connector is seated.
- 2Check the pressure hose for blockage, kinks, or disconnection.
- 3Inspect the sensor harness for open wiring.
- 4If wiring and sensor checks pass, the main PBA may need diagnosis.
RELATED CODES
Other Samsung top-load washer codes
FAQ
Frequently asked questions
What does the 1C / 1E error code mean on a Samsung top-load washer?▾
The washer is not receiving a reliable water-level signal from the pressure sensor circuit.
Can I clear the 1C / 1E code myself?▾
In many cases yes — start with the safe checks listed above before resetting the appliance. Call for service if the washer fills normally but still reports 1C or 1E, or if the code returns after a reset.
How much does it cost to fix a Samsung top-load washer showing 1C / 1E?▾
Most Samsung top-load washer repairs in South Florida run between $180 and $400 including parts. The exact cost depends on which component is faulty. Express Xpert provides a written flat-rate quote before any work starts.
SAME-DAY REPAIR
Still seeing 1C / 1E after the safe checks?
If the code returns after a reset or the safe checks above don't resolve the issue, the appliance likely needs internal testing. Express Xpert services Miami-Dade, Broward, and Palm Beach with same-day top-load washer repair.